Showing 33–48 of 148 results
Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.
FEATURES:
240-575 Volt, 60 Hz, 3 Ph electrics
1.0 Horsepower motors
Router spindle speed of 12,000 RPM
Horizontal routing capacity with length stop of 300x100mm (11.81 x 3.94 in.)
Horizontal routing capacity with copying template 270x70mm (10.63 x 2.76 in.)
Horizontal stroke 80mm (3.15)
Vertical routing capacity with length stop of 290×100 (11.42×3.94 in.)
Vertical routing capacity with copying template 230x70mm (90.05 x 2.76 in.)
Vertical stroke 120mm (4.72 in.)
Request a Quote
Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.
FEATURES:
240-575/60/3 Electrics
Two Hand Safety Controls
5.5 HP Drive Motor
2800 RPM Sawblade Spindle Speed
Cast Construction – Head Frame and Support, Back Fence, et.
Plexiglass Safety Shield
Two Vertical Pneumatic Clamps
Pneumatic Sawhead Feed
Pulsed Spray Mist Blade Lubrication System
Request a Quote
Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.
FEATURES:
240-575 Volt, 60 Hz, 3 Ph Electrics
5.5 HP Drive Motor
Two Manual Horizontal Clamps
Cast Construction – Head and frame support, back fence, etc.
3300 rpm Saw blade speed
Two Vertical Pneumatic Clamps
Pneumatic Saw head Feed
Air Service Unit
Request a Quote
Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.
STANDARD ACCESSORIES:
240-575 Volt, 60 Hz, 3 Ph Electrics
4.1 HP Drive Motor
Two Pneumatic Horizontal Clamps
One Pneumatic Vertical Clamp
Cast Iron Precision Machined Base with Continuous Material Support
All angles can be selected between 0-45° by pivoting the sap-head left and right of center
Circular Saw Blade (380 mm diameter / 14.96”
Tools
Sheet Metal Base
Pulse Spray Mist Coolant System
Request a Quote
Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.
FEATURES :
240-575 Volt, 60 Hz, 3 Ph Electrics
4.1 HP Drive Motor
Two Manual Horizontal Clamps
Cast Iron Precision Machined Base with continuous material support
All angles can be selected between 0 – 45° by pivoting the sawhead left and right of center
Circular saw blade (380 mm diameter / 14.96”)
Tools
Operation and service manual
One (1) year limited warranty
Request a Quote
EMT-7R Power swagging/rotary Machine (Includes ONE SET of 3/8″ Single Bead Rolls)
NEW EMT-7R Power swaging/rotary Machine (Includes ONE SET 3/8″ Single Bead Rolls)
11″ Throat Depth
Constructed of Heavy Cast-Iron
Reduction Gears Run Smoothly and Quietly in an Oil Bath Gear Case
14GA Mild Steel Capacity (16GA Stainless Steel)
Sensorless Vector Variable Speed Drive (High torque at Low speed!)
Variable Speed Footswitch (Not Included with Air/Oil Top Shaft Control)
Forward/Reverse Switch
1 HP Motor: 110V, 220V 1PH or 3PH, 440V
Weight: 400 Lbs.
Request a Quote
Kit Rotary Manual Junior Bender with standard equipment and Nr. 9 Formers. Closed circuit hydraulic manual pump – Rotating fork for maximum work flexibility.
Junior Bender Kit c/w 5 Imperial Former
Max Capacity:
Coated and plain soft copper tubes = from 10 to 18 mm
Plain tubes = from 20 to 22 mm
(depending on material)
Max Capacity: 22 x 1.5 mm
Min Bending Radius: 2.5 x
Max Bending Angle: 90
Request a Quote
Ercolina’s 030 Mega Bender is ideal for producing consistent quality bends in pipe, tube, squares, solids and other profiles.
Mild steel tube capacity 3″
Pipe capacity 2-1/2″ Sch. 10
Square tube capacity 2″
Maximum CLR 15″
Bend to CLR as small as 2D
Touch screen programming with system diagnostics in multiple languages
Quick-change tooling system
Digital display of bend angle
Material spring back compensation
Accurate counterbending die positioning
Foot pedal control for hands-free operation
Request a Quote
Ercolina machines are designed and manufactured to deliver years of trouble-free bending performance.
Heavy-duty gear case with maximum 8″ CLR Patented tooling system achieves CLR two times diameter without mandrel Low voltage 24V controls Programmable spring-back settings ensure bend accuracy for a wide variety of material Programmable bend angles 0 to 180 Remote foot pedal for hands free operation Patented swing away vise system and hex mounted tooling increase productivity Overload protection controls Standard multiple language capability Transportation wheels and lift handle built into base cabinet Tool free tooling changes with multiple CLR available for each diameter Accepts Ercolina two axis A40/P positioner table No hydraulics Comprehensive (1) one-year warranty
Request a Quote
Ercolina’s portable model 070 Medi Bender is ideal for fabricators and contractors with job site bending applications.
FEATURES:
Portable machine ideal for fabricators and contractors with jobsite bending applications
Bends ferrous and non-ferrous materials: 1/4″ to 1-1/4″
Replaces outdated ram style hydraulic benders
Bends angles 0 to 180
Bends to 90 in (6) seconds
Programmable bend angles with LED display
Achieves bends as small as 2D with non-mandrel tooling
Programmable material spring back compensation
Patented tooling system with multiple radii available
Remote foot pedal for hands free operation
Patented swing away counter bending die vice
Request a Quote
Ercolina’s CE50 angle roll models are available either with manual or hydraulic center roll positioning.
50mm roll shaft diameter
Maximum pipe capacity 2-1/2″Sch. 40
Maximim angle capacity 2-3/8″x 2-3/8″ x 1/4″
Bending speeds 20% faster than competitive machines
Universal tooling set included with each machine 7″ OD
Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
Heavy duty structure and rigid components for high section modulus ratings
Reinforced engineered mainframe design proven to outperform competitive models
Patented by Ercolina simultaneous downfeed and roll movement to minimize deformation
Request a Quote
Ercolina’s CE35 angle roll offers the convenience of operating in the vertical or horizontal position.
40mm roll shaft diameter
Maximum pipe capacity 1-1/2″ Sch. 40
Maximum angle capacity to 1-1/2″ x 1-1/2″ x 1/4″
Bending speeds 20% faster than competitive machines
Universal tooling set included with each machine 6-5/8″ OD
Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
Heavy duty structure and rigid components for high section modulus ratings
Reinforced engineered mainframe design proven to outperform competitive models
Patented by Ercolina simultaneous downfeed and roll movement to minimize deformation
Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage
Inline direct drive roll shaft system
Optional Anti-twist correction system for angle iron Leg In applications
Request a Quote
Ercolina’s CE40 angle roll models are available either with manual or hydraulic center roll positioning.
40mm roll shaft diameter
Maximum pipe capacity 2″ Sch. 40
Maximum angle capacity 2″ x 2″ x 1/4″
Bending speeds 20% faster than competitive machines
Universal tooling set included with each machine 6-5/8″ OD
Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
Heavy duty structure and rigid components for high section modulus ratings
Reinforced engineered mainframe design proven to outperform competitive models
Patented by Ercolina simultaneous downfeed and roll movement to minimize deformation
Request a Quote
Ercolina’s CE70 angle roll model has hydraulic center roll positioning with manual anti-twist correction system for angle iron Leg In applications (hydraulic system is optional).
Features:
Bending speeds 20% faster than competitive machines
Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
Heavy duty structure and rigid components for high section modulus ratings
Reinforced engineered mainframe design proven to outperform competitive models
Patented by Ercolina; simultaneous downfeed and roll movement minimizes deformation
Programmable touch pad controls with digital center roll positioning display
Universal tooling set included witheach machine
Request a Quote
Ercolina’s EN100 Pipe & Tube Notcher is ideal for hand railing, chassis and roll cages, fences and gates, furniture frames, marine rails and arches, tubing and plumbing for restaurant and dairy.
Notch angles to 60′ in pipe or tube up to 3″
Replaces outdated notching methods of using hole saws, end mills, grinding wheels and flame cutting.
Patented simultaneous infeed and crossfeed action extends belt life and reduces heat
Uses premium abrasive belts for a wide range of materials including; carbon steel, stainless steel, Inconnel, chrome-moly, aluminum and titanium
Graduated vise 0-60 with vertical adjustment for offset angles
Patented Quick Change roller system
Converts to abrasive belt grinder with optional accessory
Top mounted deburring surface
Over 25 notcher rollers available
Tool free belt changeover
Request a Quote
Easy to use control offers easy access to manual and auto operating modes, system diagnostics and multiple languages.
FEATURES:
Bends Material 3/8″ to 3″
Ideal for Prototype or small production applications
CLR as small as 1.5D
NC Programmable C axis with manual X and Y positioning
Variable bending speed
Ideal for bending thin wall mild steel, stainless steel, aluminum and other materials
Programmable bend sequence and mandrel retraction
Independent clamp and pressure die adjustment
Request a Quote
