Showing all 6 results

FLAGLER “S” Cleat

The Flagler Corporation provides the experience and technical support to meet the roll forming equipment needs of their customers.

Specifications:

  • Standard with Boot Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.
  • Speed: Approx. 100 feet per minute.
  • Motor: 5 HP 230/460/3/60/1800 RPM .
  • Drive: Double Matched Vee Belt.
  • Base: Arc Welded Steel. Heavy top plate.
  • Dimensions: 68″ long, 24″ wide, 48″ high.
  • Shipping Weight: Approximately 1050 pounds.

FLAGLER 20GA Pittsburgh Rollformer

Used 20ga Pittsburgh

SPECIFICATIONS:

  • Capacity: 20 ga.
  • Depth of Pocket: 5/16″ width, on built-in Pittsburgh
  • Lock rolls, w/hammer over edge
  • Adjustable
  • Extended shafts: for standard auxiliary rolls
  • Drive cleat rolls optional
  • Speed: Approx. 23″ per minute
  • Motor: 3/4 HP, 115 Volt, 1 Ph, 60 Hz 1800 RPM
  • Drive Belt: V-belt
  • Base: Arc-welded steel, heavy top plate
  • Dimensions:36″ L x 16-1/2″ W x 37″H
  • Approx. shipping weight: 350 lbs.

FLAGLER Button Punch Snap Lock

Used FLAGLER Button Punch Snap Lock

SPECIFICATIONS:

  • 20-28ga Cap.
  • 7/16″ Flanger Height
  • 18 FPM Forming Speed
  • HP 115/230 Volt Single Phase
  • 250Lbs. Approximate Shipping Weight

FLAGLER High Speed Quadformer Button Lock Rollformer

The Flagler Corporation provides the experience and technical support to meet the roll forming equipment needs of their customers.

Features:

  • Standard with re info rced “S” Cleat & 1 1/8″ Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for auxiliary rolls
  • Speed: Approx. 100 feet per minute.
  • Motor: 5 HP 230/460/3/60/1800 RPM .
  • Drive: Double Vee Belt.
  • Base: Arc Welded Steel. Heavy top plate.
  • Dimensions: 68″ long, 27″ wide, 48″ high,
  • Shipping Weight: Approximately 1200 pounds

LOCKFORMER MODEL 20 GA. PITTSBURG ROLLFORMER

  • Equipped with Acme Lock Rolls
  • Auto Guide Power Flanging Attachment
  • 20 – 26 ga Capacity
  • 3/8″ seam
  • Uses Approx 1″ of material
  • 25 FPM
  • 3/4 HP, 110 Volt, 60 Hz, 1 Ph Motor
  • Arc-welded steel, heavy top plate
  • 36″ L x 17″ W x 42″ H
  • 290lb approx shipping weight

MODERN/LINMAC L-20 LOCK FORMING MACHINE

LOCK FORMING MACHINE C/W DRIVE CLEAT ROLLS & FLANGER

SPECIFICATIONS:

  • Capacity: 20-28ga Flanging Attachment
  • Capacity: 22-28ga Drive Cleat
  • Capacity: 20 ga.Pittsburgh Uses approx. 1” of material
  • Depth of Pocket: 5/16” (8 mm) Width of hammer over edge adjustable up to 3/8” (9.5mm)
  • Speed: 25 feet per minute
  • Motor: 1 HP, 3 Phase A.C. Motor. Manual switch.
  • Drive: V-belt
  • Stand: ARC welded steel. Heavy top plate.